Rotary Bum Premix Starter Kit with Measuring Bottle, 7 in. Funnel and 1 Quart Idemitsu Premix
Rotary Bum Premix Starter Kit with the 2nd GEN Premix Measuring Bottle, Mini Funnel and 1 Quart Idemitsu Premix
- Rotary Bum 2nd GEN 8oz/225ml Premix Measuring Bottle
- Flotool Mini 7 inch Funnel
- Idemitsu Rotary Premix
IDEMITSU Racing Rotary Engine Pre-Mix
- A special blend of base oils reduces deposits and subsequent exhaust port clogging. As a result, your rotary will maintain the power at which it was designed.
- Special detergent/dispersant additives keep you fuel injectors clean to reduce maintenance.
- Provides additional lubrication for apex and side seals to increase seal life and increase efficiency of engine.
- Special additives allow for better sealing of the chamber, creating greater efficiency and more power.
Rotary Bum Premix Measuring Bottle Dimensions: 6 1/4 in. Tall x 2 in. Wide
Bottles are made of High density polyethylene (HDPE) with temperature tolerances of -100 to 190 degrees F. Bottle is dense and firm unlike the quart container the premix comes in that is so flimsy, it can slip out of your hands. Through testing, very minimal, if any drip occurs after the cap is put back on. So no residual leakage once opened unlike the quart container.
Lids are made of polypropylene (PP) with a liner that seals and stays tight for no residual leaking, during testing, and has temperature tolerances of 0 to 240 degree F. Good for filling the bottles and storing in your brap brap during the hot summer heat.
The quality and usefulness of the Rotary Bum Premix Measuring Bottle is backed by a 1 year warranty. Although the lids have passed our tests, if they do leak after time, contact us and we'll send out a replacement cap free of charge.
DO NOT PUT GASOLINE OR ANY FUELS INTO THIS CONTAINER. TESTED and APPROVED FOR PREMIX AND MOTOR OIL'S ONLY. Other application such as motorcycles tend to add gas with premix into the container to premix it before putting into the gas tank. Do not do that with this bottle.